Skip to content

Mark’s Bench

Hobbies. Things. Stuff.

  • Contact Me

Month: August 2020

Another Failure… But Kinda Cool

I was printing two objects and the small one in the back got knocked over so there was a birdsnest of PETG sitting there. Fortunately, the large object in front printed successfully.

Do not leave a 3D printer unattended!

Author MarkPosted on August 4, 2020March 15, 2021Categories 3D Printing2 Comments on Another Failure… But Kinda Cool

Recent Posts

  • Setting Up debian-backport Repository On A Raspberry Pi
  • Very Simple CircuitPython Driver for Generic 64Mb SPI PSRAM
  • Very Simple MicroPython Driver For Microchip 24×256 and 24×512 I2C EEPROMs
  • So… Firefox.
  • Very Simple CircuitPython Driver For Microchip 24×256 and 24×512 I2C EEPROMs

Recent Comments

  • Mark on 10YQM / NT64 COB LEDs
  • Mark on Recovering A Lost mdadm RAIDset In A Raspberry Pi-Based RAID Mirror
  • Mark on Removing IR Filter From ESP32-CAM
  • Carsten on Removing IR Filter From ESP32-CAM
  • Paul Rodenhuis on Recovering A Lost mdadm RAIDset In A Raspberry Pi-Based RAID Mirror

Archives

  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • December 2020
  • August 2020
  • July 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • November 2019
  • October 2019
  • September 2019
  • August 2019
  • July 2019
  • June 2019
  • May 2019

Categories

  • 3D Printing
  • Biology
  • Building Things
  • Electronics
  • Fixing Stuff
  • Health and Medicine
  • Microscope
  • Music
  • Projects
  • Radio
  • Random Stuff
  • Science-y Stuff
  • Software
  • Whoops

About

Hi, I’m Mark. I’m an engineering technologist by trade but a tinkerer at heart. I have more hobbies than I can count, and I’m always on the lookout for new ones.

There are few things I find as satisfying as helping someone out, figuring something out, or learning something new. There’s so much neat stuff out there!

  • Contact Me
Mark’s Bench Proudly powered by WordPress